Our Release coating film made from virgin PET substrate and our original release agent provides excellent dimensional stability, stable release of labels, and heat resistance.
    Best to print Heat Transfer Label for the Garment industry.
    We have many different models to match many different ink systems and printing equipment in the market.

Cut Sheet PET Release coating Film
PET Release coating Film Roll
Roll PET Release coating Film
  • ADg-RFSMS Series : Single Side Matte coated for Screen Printing
      ADg-RFSMS2 : Lower release force, slight-matte effect, cold/warm peel
      ADg-RFSMS6 : Middle release force, slight-matte effect, cold peel
      ADg-RFSMS86 : Higher release force, middle-matte effect, cold peel
    These models are the most cost-effective for almost any type of screen printed heat transfer label.
    You can select from three models with Different Release force (label peeling off force) and Different matte-surface feel. The high release force model is recommended for the plastisol ink system.
    – Standard Thickness : 75µm, 100µm
  • ADg-RFSMT Series : Single Side Dual Matte coated for Screen Printing
      ADg-RFSMT2 : Lower release force, slight-matte effect, cold/warm peel
      ADg-RFSMT6 : Middle to high release force, slight-matte effect, cold peel
    These models have the ink-receiving layer on its printing side surface and are more stable especially for some special type labels like “Raised up or High-Density Heat Transfer Label” or “Large-area size Label” printing. Of course, you can use other types of heat transfer labels too.
    – Standard Thickness : 75µm, 100µm
  • ADg-RFDMS Series: Double Side Matte coated for Screen Printing
      ADg-RFDMS2 : Lower release force, slight-matte effect, cold/warm peel
      ADg-RFDMS6 : Middle release force, slight-matte effect, cold peel
      ADg-RFDMS86 : Higher release force, middle-matte effect, cold peel

    These films are double side coated models of ADg-RFSMS series. Users can print any side of this film.
    Standard Thickness : 75µm, 100µm

  • ADg-RFSSS : Single Side Super-Matte coated for Screen Printing
      Higher release force, strong-matte effect, cold peel

    This model has Super-Matte (like sandblasted) surface effect.
    You can get more frosting-feel on the surface of your heat transfer label using this film.
    Standard Thickness : 100µm

  • ADg-RFSMH2 : Single Side printable Matte for Screen Printing (Hot Peel)
      Lower release force, middle-matte effect, Hot peel, and cold peel

    This film is capable of Hot peeling. Also, this performs good cold peeling with different ink systems.
    Standard Thickness : 75µm, 100µm

  • ADg-RFSMO : Single Side Matte coated for Offset Printing
      Middle release force, slight-matte effect, cold peel

    This model has an ink-receiving layer on its printing side surface and This film has specialized release coating that is suitable for offset printing.
    Standard Thickness : 75µm, 100µm

  • ADg-RFSMD1 : Single Side Matte coated for Digital Tonner Laser Printing
      Middle release force, slight-matte effect, cold peel

    This film is for digital printing. It’s Printable by on-demand production printer from RICHO, FUJI XEROX, etc.
    Standard Thickness : 75µm, 100µm

  • ADg-RFSMD2 : Single Side Matte coated for Digital Offset Printing
      Middle release force, slight-matte effect, cold peel

    This film is for on-demand production printer HP Indigo, etc. We currently provide sheet form only.
    Standard Thickness : 100µm

  • ADg-RFSMD3 : Single Side Matte coated for Ink-jet Printing
      Middle release force, slight-matte effect, cold peel

    This film is for DTF printing, etc. We can provide it in sheet form or roll form. Double side matte model(ADg-RFDMD3) is also available.
    Standard Thickness : 100µm

General Specification of our Heat Transfer films

    • Compatible Ink： Water-base, Solvent-base, Plastisol, Silicon
             (we recommend to have test production stage before use)
    • Heat resistance：60℃/10hour: shrink 0.5% or less,
           125℃/10sec:shrink 0.5% or less,
           190℃/10sec:shrink 2.0% or less,
    • The recommended transfer condition by heat press machine
           180℃/30sec or less
    • Antistatic Treatment： Applied
    • Solvent Resistance： Water, Alcohol, other solvents
    • Silicone Transitivity： Low

We can provide customized sheet sizes on your request. Please contact us.

Why use PET?
PET release coating film costs higher than the release paper…. BUT,

Stable against humidity.

The paper will absorb humidity much and may affect its dimension. The printed label will roll up itself and very difficult to set the correct location on the transfer target.
Moreover, it may cause an unexpected release from the paper before transfer.
The PET film will not. Easy to handle in warehouse and transportation.

 

You can see the printed labels from the non-printed side.

This means;
* You will not mistake the wrong label with the same shape or different colors.
* You can find artwork printing problems before transfer on your target.
* Easy to locate on target without any label-outline printing on the back-side.

All these benefits contribute to your productivity and quality.